Internal LED Specifications

NT200A02-SCC Installation

Platform
Napatech SmartNIC
Content Type
Hardware Installation Guide

Internal LEDs

Characteristic Description
LEDs Internal time synchronization LEDs
Location
Figure. Older version
Page-1 Sheet.1 Internal time synchronization LED 2 Internal time synchronization LED 2 Sheet.2 Sheet.3 Internal time synchronization LED 1 Internal time synchronization LED 1 Sheet.4 Sheet.5

Figure. Newer version
Page-1 Sheet.1 Sheet.2 Sheet.3 Sheet.4 Internal MCX time synchronization connector 1 Internal time synchronization LED 1 Sheet.5 Internal MCX time synchronization connector 2 Internal time synchronization LED 2

Internal time synchronization LEDs

State and Color Condition
Off No driver is loaded, or no PPS or NT-TS pulse is detected or generated.
Flashing green synchronous with the PPS or NT-TS pulse When the corresponding time synchronization connector is configured as an:
  • Input connector: A driver is loaded, and a valid PPS or NT-TS signal is detected.
  • Output connector: A driver is loaded and a PPS or NT-TS signal is generated.