About this task
This describes how to detect the Napatech SmartNIC after installing the hardware.
Procedure
-
Install a Napatech SmartNIC in a server.
CAUTION:Refer to these documents for information on how to install a Napatech SmartNIC in a server:
- NT200A02-SCC: DN-1169
- NT200A02-NEBS: DN-1200
- NT200A01-SCC: DN-1016
- NT200A01-NEBS: DN-1017
- NT100A01-SCC: DN-1261
- NT100A01-NEBS: DN-1262
- NT100E3-1-PTP: DN-0848
- NT100E3-1-PTP-NEBS: DN-0896
- NT80E3-2-PTP: DN-0980
- NT80E3-2-PTP-NEBS: DN-0981
- NT50B01: DN-1251
- NT40A01-SCC: DN-0954
- NT40A01-NEBS: DN-0955
- NT40E3-4-PTP: DN-0797
- NT40E3-4-PTP-NEBS: DN-0897
- NT20E3-2-PTP: DN-0904
- NT20E3-2-PTP-NEBS: DN-0905
-
Detect the SmartNIC using lspci with the Napatech vendor ID
18f4.
lspci -d 18f4:
An output example:03:00.0 Network controller: Napatech A/S NT50B01 Network Adapter
Note: Install the PCI utility package if it is not installed. For example:dnf install pciutils