This shows DPDK API functions related to device configuration and control.
Functions for device configuration and control
This table shows which DPDK API functions to manage and interact with devices that are supported on Napatech SmartNICs running Link-Inline™ Software.
Note: Table legend:
- X: Supported.
- –: Not supported.
| DPDK API | Parameter | Support |
|---|---|---|
| rte_eth_dev_configure | nb_rx_queue | – |
| nb_tx_queue | – | |
| dev_conf.link_speeds | – | |
| dev_conf.rxmode | – | |
| dev_conf.txmode | – | |
| dev_conf.lpbk_mode | – | |
| dev_conf.rx_adv_conf | – | |
| dev_conf.tx_adv_conf | – | |
| dev_conf.dcb_capability_en | – | |
| dev_conf.intr_conf | – | |
| rte_eth_dev_start | X | |
| rte_eth_dev_stop | X | |
| rte_eth_dev_set_link_up | X | |
| rte_eth_dev_set_link_down | X | |
| rte_eth_dev_close | X | |
| rte_eth_dev_reset | – | |
| rte_eth_link_update?? | X | |
| rte_eth_dev_is_removed | – | |
| rte_eth_promiscuous_enable | – | |
| rte_eth_promiscuous_disable | – | |
| rte_eth_allmulticast_enable | – | |
| rte_eth_allmulticast_disable | – | |
| rte_eth_dev_mac_addr_remove | – | |
| rte_eth_dev_mac_addr_add | – | |
| rte_eth_dev_default_mac_addr_set | – | |
| rte_eth_dev_set_mc_addr_list | – | |
| rte_eth_dev_set_mtu | X | |
| rte_eth_stats_get | X | |
| rte_eth_stats_reset | X | |
| rte_eth_xstats_get | X | |
| rte_eth_xstats_reset | X | |
| rte_eth_xstats_get_names | X | |
| rte_eth_dev_set_tx_queue_stats_mapping?? | – | |
| rte_eth_dev_set_rx_queue_stats_mapping?? | – | |
| rte_eth_dev_info_get | driver_name | X |
| if_index | X | |
| min_mtu | – | |
| max_mtu | – | |
| dev_flags | – | |
| min_rx_bufsize | X | |
| max_rx_pktlen | X | |
| max_lro_pkt_size | – | |
| max_rx_queues | X | |
| max_tx_queues | X | |
| max_mac_addrs | X | |
| max_hash_mac_addrs | – | |
| max_vfs | – | |
| max_vmdq_pools | – | |
| rx_seg_capa | – | |
| rx_offload_capa | – | |
| tx_offload_capa | – | |
| rx_queue_offload_capa | – | |
| tx_queue_offload_capa | – | |
| reta_size | – | |
| hash_key_size | – | |
| flow_type_rss_offloads | X | |
| default_rxconf | – | |
| default_txconf | – | |
| vmdq_queue_base | – | |
| vmdq_queue_num | – | |
| vmdq_pool_base | – | |
| rx_desc_lim | – | |
| tx_desc_lim | – | |
| speed_capa | X | |
| nb_rx_queues | – | |
| nb_tx_queues | – | |
| default_rxportconf | – | |
| default_txportconf | – | |
| dev_capa | – | |
| switch_info | – | |
| rte_eth_rx_queue_info_get | – | |
| rte_eth_tx_queue_info_get | – | |
| rte_eth_rx_burst_mode_get | – | |
| rte_eth_tx_burst_mode_get | – | |
| rte_eth_dev_fw_version_get | X | |
| rte_eth_dev_get_supported_ptypes | – | |
| rte_eth_dev_set_ptypes | – | |
| rte_eth_dev_vlan_filter?? | – | |
| rte_eth_vlan_tpid_set?? | – | |
| rte_eth_dev_set_vlan_strip_on_queue?? | – | |
| rte_eth_dev_set_vlan_offload | – | |
| rte_eth_dev_set_vlan_pvid | – | |
| rte_eth_dev_rx_queue_start | X | |
| rte_eth_dev_rx_queue_stop | X | |
| rte_eth_dev_tx_queue_start | X | |
| rte_eth_dev_tx_queue_stop | X | |
| rte_eth_rx_queue_setup | nb_rx_desc | – |
| socket_id | – | |
| rx_conf | – | |
| rte_eth_dev_rx_queue_release?? | X | |
| rte_eth_dev_rx_intr_enable | – | |
| rte_eth_dev_rx_intr_disable | – | |
| rte_eth_tx_queue_setup | nb_tx_desc | – |
| socket_id | – | |
| tx_conf | – | |
| rte_eth_tx_queue_release?? | X | |
| rte_eth_tx_done_cleanup | – | |
| rte_eth_led_on | – | |
| rte_eth_led_off | – | |
| rte_eth_dev_flow_ctrl_get | – | |
| rte_eth_dev_flow_ctrl_set | – | |
| rte_eth_dev_priority_flow_ctrl_set | – | |
| rte_eth_dev_uc_hash_table_set | – | |
| rte_eth_dev_uc_all_hash_table_set | – | |
| rte_eth_dev_udp_tunnel_port_add | – | |
| rte_eth_dev_udp_tunnel_port_delete | – | |
| rte_eth_set_queue_rate_limit | – | |
| rte_eth_rss_hash_update | – | |
| rte_eth_rss_hash_conf_get | – | |
| rte_eth_dev_rss_reta_update | – | |
| rte_eth_dev_rss_reta_query | – | |
| rte_eth_dev_get_reg_info | – | |
| rte_eth_dev_get_eeprom_length | – | |
| rte_eth_dev_get_eeprom | – | |
| rte_eth_dev_set_eeprom | – | |
| rte_eth_dev_get_module_info | – | |
| rte_eth_dev_get_module_eeprom | – | |
| rte_eth_flow_ops_get?? | X | |
| rte_eth_dev_get_dcb_info | – | |
| rte_eth_timesync_enable | – | |
| rte_eth_timesync_disable | – | |
| rte_eth_timesync_read_rx_timestamp | – | |
| rte_eth_timesync_read_tx_timestamp | – | |
| rte_eth_timesync_adjust_time | – | |
| rte_eth_timesync_read_time | – | |
| rte_eth_timesync_write_time | – | |
| rte_eth_read_clock | – | |
| rte_eth_xstats_get_by_id | X | |
| rte_eth_xstats_get_names_by_id | X | |
| rte_eth_tm_ops_get?? | – | |
| rte_eth_mtr_ops_get?? | X | |
| rte_eth_dev_pool_ops_supported | – | |
| rte_eth_dev_hairpin_capability_get | – | |
| rte_eth_rx_hairpin_queue_setup | – | |
| rte_eth_tx_hairpin_queue_setup | – | |
| rte_eth_fec_get_capability | – | |
| rte_eth_fec_get | – | |
| rte_eth_fec_set | – | |
| rte_eth_hairpin_get_peer_ports | – | |
| rte_eth_hairpin_bind | – | |
| rte_eth_hairpin_unbind | – | |
| rte_eth_hairpin_queue_peer_update | – | |
| rte_eth_hairpin_queue_peer_bind?? | – | |
| rte_eth_hairpin_queue_peer_unbind?? | – | |
| rte_eth_get_monitor_addr | – | |
| rte_eth_representor_info_get | – | |
| rte_eth_rx_metadata_negotiate | – |
Related links:
- Features Overview in the DPDK documentation
- Running the Application in the DPDK documentation