Installing the Napatech SmartNIC

Install and detect the Napatech SmartNIC using the lspci command.

1. Install a Napatech SmartNIC in a server.
   CAUTION:

   Refer to these documents for information on how to install a Napatech SmartNIC in a server:

   • NT400D11-SCC: DN-1328
   • NT400D11-NEBS: DN-1329
   • NT200A02-SCC: DN-1169
   • NT200A02-NEBS: DN-1200
   • NT100A01-SCC: DN-1261
   • NT100A01-NEBS: DN-1262
   • NT50B01: DN-1251
   • NT40A11-SCC: DN-1326
   • NT40A11-NEBS: DN-1327
   • NT40A01-SCC: DN-0954
   • NT40A01-NEBS: DN-0955
   • NT40E3-4-PTP: DN-0797
   • NT40E3-4-PTP-NEBS: DN-0897
   • NT20E3-2-PTP: DN-0904
   • NT20E3-2-PTP-NEBS: DN-0905
2. Detect the SmartNIC using lspci with the Napatech vendor ID 18f4.

   lspci -d 18f4:

   An output example:

   03:00.0 Network controller: Napatech A/S NT50B01 Network Adapter

   Note: Install the PCI utility package if it is not installed. For example:

   dnf install pciutils

   The SmartNIC is detected.