The Napatech Software Suite internally maintains a number of properties.

These properties can be queried by applications that wish to obtain information about
the capabilities of the Napatech driver and installed adapters.

Properties are addressed in a hierarchical fashion. For example: Adapter0.FpgaGeneration
addresses the FpgaGeneration property on adapter 0.

It is also possible to query ini-file settings through the properties interface. These
settings are located under the ini "section". If, for example, an application
wishes to read the "HostBufferHandlerAffinity" setting on adapter 2 the following address
should be used: ini.Adapter2.HostBufferHandlerAffinity

Note: An adapter property's existence does not depend on the adapter type.
All adapters have the same properties regardless of adapter and FPGA generation, but the values of the properties depend on whether the adapter supports the given capabilities.

System properties
Properties in the system section are system wide.

Adapter properties
The adapter section contains properties that are specific to a particular adapter.

See below for a description of the available properties.

Section
Parameter	Description	Possible values
Adapter
FpgaGeneration	Specifies FPGA generation on adapter	2: 2nd generation FPGA 3: 3rd generation FPGA 4: 4th generation FPGA
PortOffset	Offset of the starting port on adapter
PortCount	Number of ports on adapter
RxHostBuffersCfg	Number of Rx hostbuffers configured
TxHostBuffersCfg	Number of Tx hostbuffers configured
RxHostBuffersMax	Maximum number of Rx hostbuffers supported by FPGA
TxHostBuffersMax	Maximum number of Tx hostbuffers supported by FPGA
Adapter.Filter
VnTag	Indicates the level of VN-TAG filtering supported	0: Not supported 1: Supported
IpMatch	Indicates whether the adapter supports IPMatch matching	0: Not supported 1: Supported
KeyMatch	Indicates the level of key matching supported	0: Not supported 1: Level 1 Supported 2: Level 2 Supported (bitmasks and improved key mapping)
FlowMatch	Indicates the level of flow matching supported	0: Not supported 1: Supported: non-stateful 2: Supported: stateful
Toeplitz	Indicates whether the Toeplitz hash algorithm is supported	0: Not supported 1: Supported
PcapFcsInclude	Indicates whether the ini setting "PacketPcapFcsInclude" is supported	0: Not supported 1: Supported
CorrelationKey	Indicates whether correlation key functionality is supported	0: Not supported 1: Supported
Deduplication	Indicates whether the adapter supports deduplication	0: Not supported 1: Supported
Masking	Indicates whether the adapter supports masking	0: Not supported 1: Supported
Action	Indicates whether the adapter supports the NTPL command Action	0: Not supported 1: Supported
HeaderStripping	Indicates whether the adapter supports header stripping	0: Not supported 1: Supported
Adapter.Filter.Action
VlanInsertion	Indicates whether the adapter supports VLAN insertion	0: Not supported 1: Supported
Adapter.Filter.Deduplication
WindowSize	Size of deduplication window	Size is given in µs
TableSize	Size of deduplication hash table	Number of internal entries in the FPGA deduplication hash table
Adapter.Filter.FlowMatch
FlmVersion	Flow Matcher Version
FlmCapacity	Flow Matcher Table size	MB
FlmEntrySize	Flow Matcher Entry size	bytes
Adapter.ProtocolTest
EoMPLS	Indicates whether the adapter supports the EoMLPS protocol	0: not supported 1: supported
Isl	Indicates whether the adapter's packet decoder supports the ISL protocol	0: not supported 1: supported
MacAddresses	Indicates whether the adapter's packet decoder supports MAC Addresses	0: not supported 1: supported
Vlan	Indicates whether the adapter supports VLAN tagging	0: not supported 1: supported
NovellRaw	Indicates whether the adapter supports the Novell Raw Ethernet frames	0: not supported 1: supported
Snap	Indicates whether the adapter supports the SubNetwork Access Protocol (SNAP).	0: not supported 1: supported
Llc	Indicates whether the adapter supports the Logical Link Control (LLC) protocol	0: not supported 1: supported
Ether2	Indicates whether the adapter supports the Ether2 protocol	0: not supported 1: supported
MPLS	Indicates whether the adapter supports the Multi Protocol Label Switching (MPLS) protocol	0: not supported 1: supported
IPv4	Indicates whether the adapter supports the IPv4 protocol	0: not supported 1: supported
IPv6	Indicates whether the adapter supports the IPv6 protocol	0: not supported 1: supported
UDP	Indicates whether the adapter supports the UPP protocol	0: not supported 1: supported
TCP	Indicates whether the adapter supports the TCP protocol	0: not supported 1: supported
SCTP	Indicates whether the adapter supports the Stream Control Transmission Protocol (SCTP).	0: not supported 1: supported
ICMP	Indicates whether the adapter supports the Internet Control Message Protocol (ICMP)	0: not supported 1: supported
GRE	Indicates whether the adapter supports the Generic Routing Encapsulation (GRE) protocol	0: not supported 1: supported
IPinIP	Indicates whether the adapter supports IPinIP encapsulation.	0: not supported 1: supported
EtherIP	Indicates whether the adapter supports EtherIP.	0: not supported 1: supported
GTP	Indicates whether the adapter supports the GPRS Tunneling Protocol (GTP).	0: not supported 1: supported
VXLAN	Indicates whether the adapter supports VXLAN encapsulation.	0: not supported 1: supported
CFP	Indicates whether the adapter supports Cisco Fabric Path (CFP)	0: not supported 1: supported
PPPoE	Indicates whether the adapter supports Point-to-Point Protocol over Ethernet (PPPoe)	0: not supported 1: supported
VnTag	Indicates the level of VN-TAG filtering supported	0: Not supported 1: Supported
ERSPAN	Indicates whether the adapter packet decoder supports Encapsulated Remote Switched Port Analyzer (ERSPAN)	0: not supported 1: supported
AristaTSHeader	Indicates whether the adapter packet decoder supports Arista 7280R/7500R Self-Contained Timestamp header	0: not supported 1: supported
AristaTSExtraction	Indicates whether the adapter packet descriptor supports Arista 7280R/7500R Timestamp Extraction	0: not supported 1: supported
Adapter.Rx
ChecksumMode	Indicates whether Rx Checksum can be checked for outer, inner, or both headers.	0: Not supported (always outer) 1: False / true supported (outer/inner) 2: False / true / or supported (outer/inner/both)
Sdram	Indicates whether Rx SDRAM buffer is supported	0: Not supported 1: Supported
Adapter.Rx.Sdram
Capacity	Rx SDRAM buffer size	MB
Split	Indicates whether the adapter supports SDRAM split	0: Not supported 1: Supported
Adapter.TimeSync
Ext1	Specifies whether timesync connector Ext1 is supported	0: Not supported 1: Supported
Int1	Specifies whether timesync connector Int1 is supported	0: Not supported 1: Supported
Int2	Specifies whether timesync connector Int2 is supported	0: Not supported 1: Supported
PTP	Specifies whether FPGA supports TimeSync PTP feature	0: Not supported 1: Supported
OsTime	Specifies whether FPGA supports TimeSync OsTime feature	0: Not supported 1: Supported
FreeRun	Specifies whether FPGA supports TimeSync FreeRun feature	0: Not supported 1: Supported
Ntts	Specifies whether FPGA supports TimeSync Ntts feature	0: Not supported 1: Supported
PPS	Specifies whether FPGA supports TimeSync PPS feature	0: Not supported 1: Supported
ClockAdjustmentMode	Specifies the supported TimeSync clock adjustment mode
Adapter.Tx
LiveReconfig	Specifies whether 4GA FPGA support GFG reconfiguration with live TX	0: Not supported 1: Supported
ZeroCopyTransmit	Specifies whether 4GA FPGA has zero-copy transmit	0: Not supported 1: Supported
TimedTransmit	Specifies whether 4GA FPGA supports configurable transmit timestamp formats	0: Not supported 1: Supported
UndersizedPacket	Specifies whether FPGA supports undersized packet Tx	0: Not supported 1: Supported
IgnoreWireLenZeroPacket	Specifies whether FPGA supports Tx Ignore on packets with wirelen zero	0: Not supported 1: Supported
System
StreamsMax	Specifies maximum number of streams supported
StreamIdsMax	Specifies maximum number of StreamIds supported