net/analysis/analysis_example.c
Description
This source file is an example of how to do realtime analysis of packets using NTAPI.
The following NTAPI functions are used:
- NT_Init()
- NT_ConfigOpen()
- NT_NetRxOpen()
- NT_NTPL()
- NT_NetRxGet()
- NT_NET_GET_PKT_DESCRIPTOR_TYPE()
- NT_NET_GET_PKT_TIMESTAMP()
- NT_NET_GET_PKT_WIRE_LENGTH()
- NT_NET_GET_PKT_L2_PTR()
- NT_NetRxRelease()
- NT_NetRxClose()
- NT_ConfigClose()
- NT_ExplainError()
- Note
- This example does not work with the NT4E-STD accelerator
Prerequisites
A Napatech capture accelerator is needed to run this example. The ntservice.ini must have at least one HostBuffersRx defined. Below is an example of a minimum ini-file. It will create a 32MB RX hostbuffer from NUMA node 0.
[System]
TimestampFormat = NATIVE
[Adapter0]
AdapterType = NT20E
BusId = 00:0a:00.00
HostBuffersRx = [1,32,0]
Program flow
The following is required to perform real-time analysis on packets:
- #include/nt.h - Applications/Tools only need to include nt.h to obtain prototypes, macros etc. from NTAPI.
- NT_Init(NTAPI_VERSION) - Initialize the NTAPI library. NTAPI_VERSION is a define that describes the version of the API described in the header files included by nt.h. NT_Init() will ask the NTAPI library to convert return data to the NTAPI_VERSION if possible. This will ensure that applications can run on NTAPI libraries of newer versions.
- NT_ConfigOpen() - Open a config stream in order to setup filter using the NT_NTPL() command.
- NT_NetRxOpen() - Open a stream. The stream ID must match the one used when creating the filter using the NT_NTPL() command. A stream does not return data until traffic is assigned to it by creating a filter. Stream IDs might be shared between other streams and it is possible to make several filters to one stream ID. Each filter can have a unique color in the ASSIGN. The "color" of the ASSIGN can be used to mark packets making it possible for the stream to determine if the packets it receives via NT_NetRxGet() as based on its assign or if the packet belongs to the other streams that also share the hostbuffer.
- NT_NTPL() - Assign traffic to a stream by creating a filter using a manually chosen stream ID. The stream ID must match the one used NT_NetRxOpen().
- Optional step. Wait until we start seeing packets that are hit by the NTPL assign command. This is done to avoid getting packets that are not fully classified by the stream. NT_NetRxGet() is called with a timeout of 1000ms and will return NT_STATUS_TIMEOUT in case nothing is received within 1000ms and will return NT_SUCCESS if something is returned. Return values different from that is an indication of an error. Packets that are prior to the expected time are released via NT_NetRxRelease().
- NT_NetRxGet() and NT_NetRxRelease() - Receive and release packets. Each received packet is printed with help of the Packet macros
- NT_NET_GET_PKT_DESCRIPTOR_TYPE() - Get the descriptor type (NT_PACKET_DESCRIPTOR_TYPE_PCAP, NT_PACKET_DESCRIPTOR_TYPE_NT, NT_PACKET_DESCRIPTOR_TYPE_NT_EXTENDED).
- NT_NET_GET_PKT_TIMESTAMP() - Get the timestamp of the packet.
- NT_NET_GET_PKT_WIRE_LENGTH() - Get the wire length of the packet.
- NT_NET_GET_PKT_L2_PTR() - Get a pointer to the L2 part of the packet, which is where SW decoding would start.
- NT_NetRxClose() - Close the stream when terminating. This will close the stream and release the NTPL assignment made on the hostbuffer.
Code
/*
*
* Copyright 2021 Napatech A/S. All Rights Reserved.
*
* 1. Copying, modification, and distribution of this file, or executable
* versions of this file, is governed by the terms of the Napatech Software
* license agreement under which this file was made available. If you do not
* agree to the terms of the license do not install, copy, access or
* otherwise use this file.
*
* 2. Under the Napatech Software license agreement you are granted a
* limited, non-exclusive, non-assignable, copyright license to copy, modify
* and distribute this file in conjunction with Napatech SmartNIC's and
* similar hardware manufactured or supplied by Napatech A/S.
*
* 3. The full Napatech Software license agreement is included in this
* distribution, please see "NP-0405 Napatech Software license
* agreement.pdf"
*
* 4. Redistributions of source code must retain this copyright notice,
* list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTIES, EXPRESS OR
* IMPLIED, AND NAPATECH DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING ANY
* IMPLIED WARRANTY OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, OR OF
* FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT NOT PROHIBITED BY
* APPLICABLE LAW, IN NO EVENT SHALL NAPATECH BE LIABLE FOR PERSONAL INJURY,
* OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER,
* INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, CORRUPTION OR
* LOSS OF DATA, FAILURE TO TRANSMIT OR RECEIVE ANY DATA OR INFORMATION,
* BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING
* OUT OF OR RELATED TO YOUR USE OR INABILITY TO USE NAPATECH SOFTWARE OR
* SERVICES OR ANY THIRD PARTY SOFTWARE OR APPLICATIONS IN CONJUNCTION WITH
* THE NAPATECH SOFTWARE OR SERVICES, HOWEVER CAUSED, REGARDLESS OF THE THEORY
* OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF NAPATECH HAS BEEN
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW
* THE EXCLUSION OR LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF
* INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU.
*
*
*/
/**
* @example net/analysis/analysis_example.c
* @section analysis_example_description Description
*
* This source file is an example of how to do realtime analysis of packets
* using NTAPI.
*
* The following NTAPI functions are used:
* - @ref NT_Init()
* - @ref NT_ConfigOpen()
* - @ref NT_NetRxOpen()
* - @ref NT_NTPL()
* - @ref NT_NetRxGet()
* - @ref NT_NET_GET_PKT_DESCRIPTOR_TYPE()
* - @ref NT_NET_GET_PKT_TIMESTAMP()
* - @ref NT_NET_GET_PKT_WIRE_LENGTH()
* - @ref NT_NET_GET_PKT_L2_PTR()
* - @ref NT_NetRxRelease()
* - @ref NT_NetRxClose()
* - @ref NT_ConfigClose()
* - @ref NT_ExplainError()
*
* @note
* This example does not work with the NT4E-STD accelerator
*
* <hr>
* @section analysis_example_prerequisites Prerequisites
* A Napatech capture accelerator is needed to run this example. The ntservice.ini must
* have at least one HostBuffersRx defined. Below is an example of a
* minimum ini-file. It will create a 32MB RX hostbuffer from NUMA
* node 0.
* @code
* [System]
* TimestampFormat = NATIVE
*
* [Adapter0]
* AdapterType = NT20E
* BusId = 00:0a:00.00
* HostBuffersRx = [1,32,0]
* @endcode
*
* @section analysis_example_flow Program flow
* @{
* The following is required to perform real-time analysis on packets:
* - \#include/nt.h - Applications/Tools only need to include @ref
* nt.h to obtain prototypes, macros etc. from NTAPI.
* - @ref NT_Init(@ref NTAPI_VERSION) - Initialize the NTAPI
* library. @ref NTAPI_VERSION is a define that describes the version
* of the API described in the header files included by @ref
* nt.h. NT_Init() will ask the NTAPI library to convert return data
* to the @ref NTAPI_VERSION if possible. This will ensure that
* applications can run on NTAPI libraries of newer versions.
* - @ref NT_ConfigOpen() - Open a config stream in order to setup
* filter using the @ref NT_NTPL() command.
* - @ref NT_NetRxOpen() - Open a stream. The stream ID must match the
* one used when creating the filter using the @ref NT_NTPL()
* command. A stream does not return data until traffic is assigned
* to it by creating a filter. Stream IDs might be shared between
* other streams and it is possible to make several filters to one
* stream ID. Each filter can have a unique color in the ASSIGN. The
* "color" of the ASSIGN can be used to mark packets making it
* possible for the stream to determine if the packets it receives
* via @ref NT_NetRxGet() as based on its assign or if the packet belongs
* to the other streams that also share the hostbuffer.
* - @ref NT_NTPL() - Assign traffic to a stream by creating a filter
* using a manually chosen stream ID. The stream ID must match the
* one used @ref NT_NetRxOpen().
* - Optional step. Wait until we start seeing packets that are hit by
* the NTPL assign command. This is done to avoid getting packets
* that are not fully classified by the stream. NT_NetRxGet() is
* called with a timeout of 1000ms and will return NT_STATUS_TIMEOUT
* in case nothing is received within 1000ms and will return
* NT_SUCCESS if something is returned. Return values different from
* that is an indication of an error. Packets that are prior to the
* expected time are released via NT_NetRxRelease().
* - NT_NetRxGet() and NT_NetRxRelease() - Receive and release packets. Each received packet is printed with help of the @ref PacketMacros
* - @ref NT_NET_GET_PKT_DESCRIPTOR_TYPE() - Get the descriptor type (@ref NT_PACKET_DESCRIPTOR_TYPE_PCAP, @ref NT_PACKET_DESCRIPTOR_TYPE_NT, @ref NT_PACKET_DESCRIPTOR_TYPE_NT_EXTENDED).
* - @ref NT_NET_GET_PKT_TIMESTAMP() - Get the timestamp of the packet.
* - @ref NT_NET_GET_PKT_WIRE_LENGTH() - Get the wire length of the packet.
* - @ref NT_NET_GET_PKT_L2_PTR() - Get a pointer to the L2 part of the packet, which is where SW decoding would start.
* - NT_NetRxClose() - Close the stream when terminating. This will
* close the stream and release the NTPL assignment made on the
* hostbuffer.
*
*<hr>
* @section analysis_example_code Code
* @}
*/
#include <nt.h>
#if defined(WIN32) || defined (WIN64)
//#define snprintf _snprintf
#define snprintf(a, b, c, d) _snprintf_s((a), _countof(a), (b), (c), (d))
#endif
{
int numPackets = 0; // The number of packets received
int numBytes = 0; // The number of bytes received (wire length)
NtConfigStream_t hCfgStream; // Handle to a config stream
NtNetBuf_t hNetBuf; // Net buffer container. Packet data is returned in this when calling NT_NetRxGet().
// Initialize the NTAPI library and thereby check if NTAPI_VERSION can be used together with this library
// Get the status code as text
fprintf(stderr, "NT_Init() failed: %s\n", errorBuffer);
return -1;
}
// Open a config stream to assign a filter to a stream ID.
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_ConfigOpen() failed: %s\n", errorBuffer);
return -1;
}
// Assign traffic to stream ID 1 and mask all traffic matching the assign statement color=7.
if ((status = NT_NTPL(hCfgStream, "Assign[streamid=1;color=7] = All", &ntplInfo, NT_NTPL_PARSER_VALIDATE_NORMAL)) != NT_SUCCESS) {
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NTPL() failed: %s\n", errorBuffer);
return -1;
}
// Open stat stream
fprintf(stderr, "Failed to create statistics stream: 0x%08X\n", status);
return -1;
}
// Reset stats
fprintf(stderr, "Failed resetting statistics: 0x%08X\n", status);
return -1;
}
// Get a stream handle with the hostBuffer mapped to it. NT_NET_INTERFACE_PACKET specify that we will receive data packet-by-packet
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NetRxOpen() failed: %s\n", errorBuffer);
return -1;
}
// Optional step. Wait for the first packet that hit the NTPL assign command
printf("Waiting for the first packet\n");
while (1) {
if ((status == NT_STATUS_TIMEOUT) || (status == NT_STATUS_TRYAGAIN)) {
// Timeouts are ok, we just need to wait a little longer for a packet
continue;
}
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NetRxGet() failed: %s\n", errorBuffer);
return -1;
}
// We got a packet. Check if the timestamp is newer than when the NTPL assign command was applied
break; // Break out, we have received a packet that is received after the NTPL assign command was applied
}
// Release the packet, it is too "old".
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NetRxRelease() failed: %s\n", errorBuffer);
return -1;
}
}
// Dump packet info. Stop when 100 packets has been received
while (1) {
struct _mac {
uint8_t dst[6];
uint8_t src[6];
uint16_t typelen;
printf("#%03d: %6s %016llX - %04d - %02X:%02X:%02X:%02X:%02X:%02X %02X:%02X:%02X:%02X:%02X:%02X %04x\n",
numPackets+1,
NT_NET_GET_PKT_WIRE_LENGTH(hNetBuf),
mac->dst[0], mac->dst[1], mac->dst[2], mac->dst[3], mac->dst[4], mac->dst[5],
mac->src[0], mac->src[1], mac->src[2], mac->src[3], mac->src[4], mac->src[5],
mac->typelen);
// Increment the number of packets processed.
numPackets++;
// Increment the bytes received
numBytes += NT_NET_GET_PKT_WIRE_LENGTH(hNetBuf);
// Release the current packet
if ((status = NT_NetRxRelease(hNetRx, hNetBuf)) != NT_SUCCESS) {
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NetRxGet() failed: %s\n", errorBuffer);
return -1;
}
if (numPackets == 100) {
break;
}
// Get the next packet
while (1) {
if ((status = NT_NetRxGet(hNetRx, &hNetBuf, 1000)) != NT_SUCCESS) {
if ((status == NT_STATUS_TIMEOUT) || (status == NT_STATUS_TRYAGAIN)) {
// Timeouts are ok, we just need to wait a little longer for a packet
continue;
}
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NetRxGet() failed: %s\n", errorBuffer);
return -1;
}
break; // We got a packet
}
}
// Close the stream and release the hostbuffer
NT_NetRxClose(hNetRx);
// Request stats
statSet.cmd = NT_STATISTICS_READ_CMD_QUERY_V3;
if ((status = NT_StatRead(hStat, &statSet)) != NT_SUCCESS) {
fprintf(stderr, "Failed reading statistics: 0x%08X\n", status);
return -1;
}
// Read drop counters for streamid 1
// Close stat stream
NT_StatClose(hStat);
// Delete the filter
if ((status = NT_NTPL(hCfgStream, tmpBuffer, &ntplInfo, NT_NTPL_PARSER_VALIDATE_NORMAL)) != NT_SUCCESS) {
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_NTPL() failed: %s\n", errorBuffer);
return -1;
}
// Close the config stream
// Get the status code as text
NT_ExplainError(status, errorBuffer, sizeof(errorBuffer));
fprintf(stderr, "NT_ConfigClose() failed: %s\n", errorBuffer);
return -1;
}
// Output totals
printf("Drop: %lu packets, %lu bytes\n", totDropsPkts, totDropsBytes);
printf("Done: %d packets, %d bytes\n", numPackets, numBytes);
// Close down the NTAPI library
NT_Done();
return 0;
}
//
// EOF
//