Optional Auxiliary Power Connector Specifications

NT40A01-SCC Installation

Platform
Napatech SmartNIC
Content Type
Hardware Installation Guide

Optional auxiliary power connector

The optional auxiliary power connector must be used for providing additional power to the SmartNIC, if the motherboard cannot provide the required power. For electrical ratings, see Electrical rating.

Characteristic Description
Connector type Standard PCI Express 150W-ATX power connector
Location
Optional_Auxiliary_Power_Connect Sheet.8 Sheet.7 Optional auxiliary power connector Optional auxiliary power connector Dynamic connector

Standard PCI Express 150W-ATX power connector

The optional auxiliary power connector complies with the auxiliary power connector standardized for a Standard PCI Express 150W-ATX graphics card.
Standard PCI Express 150W-ATX power connector
Pin Signal
1 +12 V
2 +12 V
3 +12 V
4 Ground
5 Sense
Note: Used by the SmartNIC to detect if the auxiliary power connector is plugged. The sense pin in the connector must be connected to ground either directly in the power cabling or in the power supply.
6 Ground