Notices

Software Architecture

product_line_custom
Napatech SmartNIC
category
Overview Document

Intellectual property rights

This document is the property of Napatech. The data contained herein, in whole or in part, may not be duplicated, used or disclosed outside the recipient for any purpose other than to conduct business and technical evaluation. This restriction does not limit the recipient’s right to use information contained in the data if it is obtained from another source without restriction.

Disclaimer

This document is intended for informational purposes only. Any information herein is believed to be reliable. However, Napatech assumes no responsibility for the accuracy of the information. Napatech reserves the right to change the document and the products described without notice. Napatech and the authors disclaim any and all liabilities.

Trademark notice

Napatech is a trademark used under license by Napatech A/S. All other logos, trademarks and service marks are the property of the respective third parties.

Copyright statement

Copyright © Napatech A/S 2017. All rights reserved.

Modification History

This document has been updated as follows:

Rev. Date Comment
1 2015-11-24 Initial version.
2 2016-03-25 Changes have been made in Sections 1.2 and 3.5. Sections 3.6 and 3.8 have been added. Changes have been made in Section 4.3 . Sections 4.5 and 5.1.3 have been added. A number of minor changes have been made.
3 2016-07-13 Changes have been made in Sections 4.1, 4.3 and 6.5. A number of minor changes have been made.
4 2016-08-31 NT200A01 has been included. Changes have been made in Chapter 1. Changes have been made in Sections 3.5, 4.3, 5.1.1, 5.1.2 and 5.1.3. A number of minor changes have been made.
5 2016-11-29 NT40A01-4×1 has been included. Changes have been made in Chapter 1. Changes have been made in Sections 2.2, 3.5, 3.11, 4.1, 4.2 and 4.3. Changes have been made in the beginning of Chapter 5. Changes have been made in Sections 5.1.1, 5.1.2, 5.1.3, 6.1 and 8.1. A number of minor changes have been made.
6 2016-12-05 Changes have been made in Section 6.1. A number of minor changes have been made.
7 2017-01-30 DN-0394 has been replaced by DN-1067. A number of minor changes have been made.
8 2017-01-31 NT200A01-2×40 has been included. Changes have been made in Section 4.3. A number of minor changes have been made.
9 2017-05-13 NT200A01-2×100/40 has been included. Changes have been made in Sections 3.7, 4.3, 6.1 and 6.4. A number of minor changes have been made.
10 2017-05-18 Changes have been made in Section 6.1. A number of minor changes have been made.
11 2017-10-01 NT40A01-4×10/1-SLB has been included. Changes have been made in Sections 4.1, 4.3 and 6.1. A number of minor changes have been made.