NT200C01

Time-Stamping and Time Synchronization

Platform
Intel® PAC
Napatech SmartNIC
Content Type
User Guide
Capture Software Version
Link™ Capture Software 12.4

Illustration

The NT200C01 SmartNIC consists of two NT100E3-1-PTP SmartNICs, which each has 3 time synchronization connectors (Ext1, Int1 and Int2) that can be configured separately for input or output (see Configuring the Time Synchronization Connectors and the Time Synchronization Time and Frequency Reference Priorities). In addition each NT100E3-1-PTP SmartNIC has two internal time synchronization connectors (Int3 and Int4) that are not supported. This figure shows an NT200C01 SmartNIC and the location of its time synchronization connectors.

NT200_All_Time_Sync_Connectors Sheet.15 Sheet.3 Internal time synchronization connector 2 Internal time synchronization connector 2 Sheet.4 Sheet.5 Internal time synchronization connector 1 Internal time synchronization connector 1 Sheet.10 External time synchro-nization connector External time synchro-nization connector Sheet.11 Sheet.12 For future use For future use Sheet.13 Sheet.16 Sheet.17 Sheet.18 Sheet.19 Sheet.20 Internal time synchronization connector 2 Internal time synchronization connector 2 Sheet.21 Sheet.22 Internal time synchronization connector 1 Internal time synchronization connector 1 Sheet.23 For future use For future use Sheet.24 Sheet.25 Sheet.26 Sheet.27 Sheet.28 Sheet.29 External time synchro-nization connector External time synchro-nization connector Sheet.30 Sheet.31 Time synchronization master Time synchronization master Sheet.32 Time synchronization slave Time synchronization slave

Each of the external time synchronization connectors contains a robust SMA connector, which ensures a more secure interface connection.

Note: In order for the two NT100E3-1-PTP SmartNICs to function as an NT200C01 SmartNIC, one of the internal time synchronization connectors on the NT100E3-1-PTP time synchronization master must be connected to one of the internal time synchronization connectors on the NT100E3-1-PTP time synchronization slave by a time synchronization cable, and the connectors must be configured accordingly.
Note: If the NT200C01 SmartNIC is to be synchronized to an external reference, the external time synchronization connector on the NT100E3-1-PTP time synchronization master must be used.