Error Codes

Reference Documentation

Intel® PAC
Napatech SmartNIC
Content Type
Reference Information
Capture Software Version
Link™ Capture Software 12.11
Napatech Software Suite: Error Codes

Napatech Error Codes

Errorcode Enum Error string
0x00000000 NT_SUCCESS Success
0x20000000 NT_STATUS_TIMEOUT Timeout
0x20000001 NT_STATUS_TRYAGAIN Resource temporarily busy, try again
0x20000002 NT_STATUS_NO_DATA No data
0x20000003 NT_STATUS_NO_MORE_DATA No more data available
0x20000004 NT_STATUS_END_OF_FILE EOF indicator
0x20000005 NT_ERROR_UNKNOWN_ERROR Unknown error
0x20000006 NT_ERROR_INTERNAL_ERROR Internal error
0x20000007 NT_ERROR_MEMORY_ALLOCATION_FAILED Memory allocation failed
0x20000008 NT_ERROR_PORT_OUT_OF_RANGE Port out of range
0x20000009 NT_ERROR_IPPROTOCOL_OUT_OF_RANGE IpProtocol out of range
0x2000000A NT_ERROR_ADAPTER_OUT_OF_RANGE Adapter out of range
0x2000000B NT_ERROR_HOSTBUFFER_RX_OUT_OF_RANGE RX host buffer out of range
0x2000000C NT_ERROR_HOSTBUFFER_TX_OUT_OF_RANGE TX host buffer out of range
0x2000000D NT_ERROR_HOSTBUFFER_INVALID_TYPE Invalid host buffer type
0x2000000E NT_ERROR_UNSUPPORTED_COMMAND Command is not supported for this adapter
0x2000000F NT_ERROR_UNSUPPORTED_SEQUENCE The sequence, in which the commands are issued, is illegal on this adapter
0x20000010 NT_ERROR_UNKNOWN_COMMAND Unknown command
0x20000011 NT_ERROR_FAILED_GETTING_FASTLOCK Failed to get fastlock
0x20000012 NT_ERROR_FAILED_RELEASING_FASTLOCK Failed to release fastlock
0x20000013 NT_ERROR_NT_SERVICE_NOT_STARTED NT Service is not started
0x20000014 NT_ERROR_INVALID_STREAM_POINTER Stream pointer invalid
0x20000015 NT_ERROR_INVALID_STREAM_HANDLE Stream handle invalid
0x20000016 NT_ERROR_WRONG_STREAM_TYPE Wrong stream type
0x20000017 NT_ERROR_ILLEGAL_TIMESTAMP_TYPE Illegal time stamp type
0x20000018 NT_ERROR_TIMESTAMP_VS_HDR_MISMATCH Detected a time stamp type setting and packet descriptor type setting mismatch
0x20000019 NT_ERROR_FAILED_SETTING_TIMESTAMP_TYPE Failed to set time stamp type
0x2000001A NT_ERROR_FAILED_TO_START_LOGGING Failed to start logging
0x2000001B NT_ERROR_FAILED_TO_READ_DRIVER_LOG Failed to read driver log
0x2000001C NT_ERROR_FAILED_TO_CLEAR_DRIVER_LOG Failed to clear driver log
0x2000001D NT_ERROR_DRIVER_ERROR Driver error
0x2000001E NT_ERROR_OS_IPC_RMID Unable to mark IPC area as destroyed
0x2000001F NT_ERROR_OS_NULL_SHM NULL pointer passed as shared memory
0x20000020 NT_ERROR_OS_CREATE_DMA Failed to create DMA buffer
0x20000021 NT_ERROR_OS_REQUEST_DMA Failed to request DMA buffer
0x20000022 NT_ERROR_OS_RELEASE_DMA Failed to release DMA buffer
0x20000023 NT_ERROR_OS_DMA_STILL_MAPPED Failed to release DMA buffer - need to unmap before releasing
0x20000024 NT_ERROR_OS_INVALID_ADAPTER OS Function called with invalid adapter number
0x20000025 NT_ERROR_OS_IOCTL_INVALID_PARAM Ioctl called with invalid parameter
0x20000026 NT_ERROR_OS_DMA_MAP Failed to map DMA memory
0x20000027 NT_ERROR_OS_COMM_CREATE_INVALID_TYPE CommCreate: invalid eType
0x20000028 NT_ERROR_OS_ACCEPT_CLIENT_TYPE CommAccept: invalid eType
0x20000029 NT_ERROR_OS_RECV_MSG_SIZE CommRecv: Message is too big
0x2000002A NT_ERROR_OS_RECV_MSG_CONN_LOST CommRecv: Connection lost while receiving
0x2000002B NT_ERROR_OS_FLOCK_OVERFLOW Too many locks in set
0x2000002C NT_ERROR_OS_FLOCKEND_INVALID_PARAM FastLockEnd called with invalid parameter
0x2000002D NT_ERROR_OS_FLOCK_AQUIRE Failed to acquire FastLock
0x2000002E NT_ERROR_OS_FLOCK_RELEASE Failed to release FastLock - CRITICAL ERROR!!
0x2000002F NT_ERROR_OS_IRQ_EVENT_WAIT_PARAM IRQEventWait called with invalid parameter
0x20000030 NT_ERROR_OS_NAMED_EVENT_INVALID_PARAM NamedEvenCreate called, but named events not yet created
0x20000031 NT_ERROR_OS_NAMED_EVENT_MAXED_OUT NamedEvenCreate called, but no more events available
0x20000032 NT_ERROR_CONFIG_NOT_SUPPORTED Configuration not supported
0x20000033 NT_ERROR_CONFIG_CONFLICT Configuration conflict
0x20000034 NT_ERROR_LOOPBACK_NOT_IMPLEMENTED Loopback not implemented
0x20000035 NT_ERROR_LOOPBACK_ARG_ILLEGAL Loopback argument illegal
0x20000036 NT_ERROR_LOOPBACK_CONFLICT Loopback configuration conflict
0x20000037 NT_ERROR_IFG_CONFIG_ERROR IFG min or max configuration error
0x20000038 NT_ERROR_ILLEGAL_TIMESTAMP_VALUE Illegal time stamp value
0x20000039 NT_ERROR_OPERATION_TIMEOUT An operation timed out
0x2000003A NT_ERROR_OPERATION_FAILED An operation failed
0x2000003B NT_ERROR_32_64_BIT_MISMATCH A 32bit/64bit mismatch between ntservice and NTAPI
0x2000003C NT_ERROR_LOOPBACK_NOT_AVAILABLE Loopback not available
0x2000003D NT_ERROR_NTHW_MODULE_NOT_SUPPORTED Nthw module register not in FPGA
0x2000003F NT_ERROR_BONDING_SLAVE_TS_NO_CONFIG Bonding Slave misses timesync configuration
0x20000040 NT_ERROR_BONDING_MASTER_NO_TS_SYNC Bonding Master failed initial time synchronization
0x20000041 NT_ERROR_BONDING_SLAVE_NO_TS_SYNC Bonding Slave failed initial time synchronization
0x20000042 NT_ERROR_PERMISSION_DENIED Permission denied
0x20000043 NT_ERROR_INVALID_EVENT Invalid of unknown event type specified
0x20000044 NT_ERROR_EVENT_RAISE_NOT_ACTIVE Raising events not activated. Specify a listen event on open
0x20000045 NT_ERROR_TX_RINGBUFFER_NOT_SUPPORTED Tx ring buffer is not supported
0x20000046 NT_ERROR_TX_RINGBUFFER_PKT_SEND_FAILED Tx ring buffer packet send failed
0x20000047 NT_ERROR_VALUE_OUT_OF_RANGE A value was out of range
0x20000048 NT_ERROR_MALFORMED_ITEM Malformed item
0x20000049 NT_ERROR_GROUP_OUT_OF_RANGE GroupId out of range
0x2000004A NT_ERROR_DESCR_BIT_POSITION_OUT_OF_RANGE The descriptor bit position is out of range
0x2000004B NT_ERROR_TX_DESCR_MODE_UNKNOWN The chosen TX descriptor is unknown or unsupported
0x2000004C NT_ERROR_FILE_OPEN A file open operation failed
0x2000004D NT_ERROR_FILE_READ A file read operation failed
0x2000004E NT_ERROR_FILE_WRITE A file write operation failed
0x2000004F NT_ERROR_THREAD_START Failed starting a thread
0x20000050 NT_ERROR_DRIVER_AND_NTAPI_VERSION_MISMATCH Mismatch of driver and NTAPI libraries
0x20001000 NT_ERROR_SPLIT Split
0x20001001 NT_ERROR_FILTER_TOO_BIG The filter is too big
0x20001002 NT_ERROR_IMPLICIT_EMPTY_FILTER Implicit empty filter
0x20001003 NT_ERROR_RETRY Retry
0x20001004 NT_ERROR_CONFLICTING_FILTER Conflicting filter
0x20001005 NT_ERROR_IMPLICIT_ALL_FILTER Implicit all filter
0x20001006 NT_ERROR_NOT_MERGED Not merged
0x20001007 NT_ERROR_INVALID_NTPLID Invalid NtplId
0x20001008 NT_ERROR_NTPLID_ALREADY_USED NtplId is already used
0x20001009 NT_ERROR_INVALID_PORT Invalid port
0x2000100A NT_ERROR_PORTS_NOT_ON_SAME_ADAPTER Ports not on same adapter
0x2000100B NT_ERROR_INVALID_HASHMODE Invalid HashMode option for selected HashMode
0x2000100C NT_ERROR_SLICEOFFSET_ZERO SliceOffset cannot be 0 without a SliceAddHeader option
0x2000100D NT_ERROR_UNSUPPORTED_HASHMODE Unsupported hash mode
0x2000100E NT_ERROR_UNSUPPORTED_HASHMODE_OPTION Unsupported hash option
0x2000100F NT_ERROR_UNSUPPORTED_HASHMASK Unsupported hash mask
0x20001010 NT_ERROR_UNSUPPORTED_ERROR_FILTER Unsupported error filter
0x20001011 NT_ERROR_UNSUPPORTED_PROTOCOL_FILTER Unsupported protocol filter
0x20001012 NT_ERROR_UNSUPPORTED_IPMATCH_FILTER Unsupported IP match filter
0x20001013 NT_ERROR_UNSUPPORTED_KEYMATCH_FILTER Unsupported keymatch filter
0x20001014 NT_ERROR_UNSUPPORTED_KEY_FILTER Unsupported key filter
0x20001015 NT_ERROR_UNSUPPORTED_IPMATCHLIST_FILTER Unsupported IP match list filter
0x20001016 NT_ERROR_UNSUPPORTED_PATTERN_FILTER Unsupported pattern filter
0x20001017 NT_ERROR_WISMODE_ENABLED_ON_DESTINATION_PORT Wismode is enabled on destination port
0x20001019 NT_ERROR_UNSUPPORTED_IPFMODE_OPTION Unsupported IPFMode option
0x2000101A NT_ERROR_UNKNOWN_DATATYPE KeySet value has unknown datatype
0x2000101B NT_ERROR_RESOURCE_IN_USE Resource is in use and cannot be released/re-configured
0x20002000 NT_ERROR_SYNTAX_ERROR Syntax error
0x20002001 NT_ERROR_BUFFER_TOO_LONG Buffer too long
0x20002002 NT_ERROR_DUPLICATE_COMMAND Duplicate command
0x20002003 NT_ERROR_PORT_RANGE_OUT_OF_RANGE Port option must include all ports on the adapter
0x20002004 NT_ERROR_HOSTBUFFER_OUT_OF_RANGE Host buffer number out of range
0x20002006 NT_ERROR_NUMANODE_OUT_OF_RANGE NUMANode out of range
0x20002007 NT_ERROR_TOO_MANY_VALUES Too many values
0x20002008 NT_ERROR_SWAPPED_RANGE Illegal range
0x20002009 NT_ERROR_STREAMID_OUT_OF_RANGE Stream ID out of range
0x2000200A NT_ERROR_MISSING_STREAMID Missing stream ID
0x2000200B NT_ERROR_SOURCE_PORT_OUT_OF_RANGE Source port number out of range
0x2000200C NT_ERROR_DESTINATION_PORT_OUT_OF_RANGE Destination port number out of range
0x2000200D NT_ERROR_PRIORITY_OUT_OF_RANGE Priority out of range
0x2000200E NT_ERROR_TIMEOUT_OUT_OF_RANGE Timeout out of range
0x2000200F NT_ERROR_OFFSET_OUT_OF_RANGE Offset out of range
0x20002010 NT_ERROR_ILLEGAL_COMPERATOR Illegal comparator used
0x20002011 NT_ERROR_MISSING_CHAR_IN_MACRO Missing character in macro name
0x20002012 NT_ERROR_ILLEGAL_CHARACTERS_IN_MACRO_NAME Illegal characters in macro name
0x20002013 NT_ERROR_MACRO_NAME_TOO_LONG Macro name is too long
0x20002014 NT_ERROR_ILLEGAL_CHARACTERS_IN_MACRO_DEF Illegal characters in macro definition
0x20002015 NT_ERROR_MACRO_DEF_TOO_LONG Macro definition is too long
0x20002016 NT_ERROR_INVALID_ARGS_IN_MACRO_DEF Invalid args in macro definition
0x20002017 NT_ERROR_POWER_SWITCH_DELAY_TOO_LARGE Power switch delay too large
0x20002018 NT_ERROR_RESERVEDDMAPOOLSIZE_MULTIPLE_OF_4 ReservedDMAPoolSize must be a multiple of 4
0x20002019 NT_ERROR_NUMSEGMENTS_TOO_LARGE NumSegments out of range
0x2000201A NT_ERROR_INVALID_SEGMENT_SIZE Invalid segment size
0x2000201B NT_ERROR_INVALID_MAX_LATENCY Invalid max latency
0x2000201C NT_ERROR_INVALID_MAX_LATENCY2 Invalid max latency - must be a multiple of 100
0x2000201D NT_ERROR_EXT_DESC_LENGTH_LARGE Extended descriptor length too large
0x2000201E NT_ERROR_TIME_SYNC_OFFSET_LARGE Time sync offset too large
0x2000201F NT_ERROR_IFG_TOO_LARGE IFG too large
0x20002020 NT_ERROR_COLOR_OUT_OF_RANGE Color out of range
0x20002021 NT_ERROR_SLICEOFFSET_OUT_OF_RANGE Slice offset out of range
0x20002022 NT_ERROR_SET_DESC_PORT_OUT_OF_RANGE Set descriptor port out of range
0x20002023 NT_ERROR_FILENAME_TOO_LONG File name too long
0x20002024 NT_ERROR_HASHVALUE_OUT_OF_RANGE Hash value out of range
0x20002025 NT_ERROR_HASHSPLIT_PART_OUT_OF_RANGE Hash split part out of range
0x20002026 NT_ERROR_HASHSPLIT_VALUE_OUT_OF_RANGE Hash split value out of range
0x20002027 NT_ERROR_HASHSPLIT_VALUE_RANGE_ERROR Hash split value range is illegal
0x20002028 NT_ERROR_HASHSPLIT_VALUE_LIST_ERROR Hash split value illegal
0x20002029 NT_ERROR_NUMBER_RANGE_TOO_LARGE256 Number too large
0x2000202A NT_ERROR_NUMBER_TOO_LARGE256 Number too large
0x2000202B NT_ERROR_TOO_MANY_EVENTS Too many events
0x2000202C NT_ERROR_LENGTH_TOO_LARGE Length too large
0x2000202D NT_ERROR_DATAMASK_OUT_OF_RANGE Data mask out of range
0x2000202E NT_ERROR_BITMASK_ILLEGAL Bitmask illegal
0x2000202F NT_ERROR_BITMASK_ILLEGAL31 Bitmask illegal
0x20002030 NT_ERROR_MISMATCH_DATATYPE_DATAVALUE Mismatch between DataType and DataValue
0x20002031 NT_ERROR_DATA_OUT_OF_RANGE Data out of range
0x20002032 NT_ERROR_DATA_OUT_OF_RANGE_HEX Data out of range
0x20002033 NT_ERROR_INVALID_DATA_RANGE Invalid data range
0x20002034 NT_ERROR_DATA_RANGE_OUT_OF_RANGE Data out of range
0x20002035 NT_ERROR_DATATYPE_MUST_BE_DEFINED Data type must be defined
0x20002036 NT_ERROR_INVALID_BYTE_STRING_0X Invalid byte string. Missing "0x"
0x20002037 NT_ERROR_FEW_CHARACTERS_BYTE_STRING Too few characters in byte string
0x20002038 NT_ERROR_MANY_CHARACTERS_BYTE_STRING Too many characters in byte string
0x20002039 NT_ERROR_ILLEGAL_STRING_MUST_BE Illegal string
0x2000203A NT_ERROR_MISSING_OR_ILLEGAL_DATATYPE Missing or illegal DataType
0x2000203B NT_ERROR_IP_ADDRESS_OUT_OF_RANGE IP address out of range
0x2000203C NT_ERROR_MAC_ADDRESS_OUT_OF_RANGE MAC address out of range
0x2000203D NT_ERROR_MISSING_FILTER_EXPRESSIONS Missing filter expressions
0x2000203E NT_ERROR_MISSING_STREAM_ID Missing stream ID
0x2000203F NT_ERROR_MISSING_EVENTS Missing events
0x20002040 NT_ERROR_DUPLICATE_MACRO Duplicate macro
0x20002041 NT_ERROR_MACRO_NOT_FOUND Error deleting macro - macro not found
0x20002042 NT_ERROR_MACRO_NO_ARGUMENT Cannot find argument in data
0x20002043 NT_ERROR_INVALID_NO_OF_ARGS_IN_MACRO_DEF Invalid number of arguments in macro definition
0x20002044 NT_ERROR_MISSING_PAREN_IN_MACRO_DEF Missing brackets '(' or ')' in macro argument
0x20002045 NT_ERROR_MISSING_COMMA_IN_MACRO_DEF Missing comma ',' in macro argument
0x20002046 NT_ERROR_INVALID_STREAM Invalid stream
0x20002047 NT_ERROR_NOT_NT_CAPFILE File doesn't contain correct file header
0x20002048 NT_ERROR_INSUFFICIENT_DATA Insufficient data
0x20002049 NT_ERROR_NO_BONDING_MASTER No bonding master detected
0x2000204A NT_ERROR_BONDING_PLACEMENT Master and slave adapters have not been configured together
0x2000204B NT_ERROR_HOSTBUFFER_MERGE Host buffer time stamp merge error
0x2000204C NT_ERROR_NO_ADAPTERS No adapters located in the system
0x2000204D NT_ERROR_SENSOR_NOT_FOUND The sensor cannot be located
0x2000204E NT_ERROR_IMAGE_CORRUPT Image is corrupt
0x2000204F NT_ERROR_IMAGE_NOT_COMPATIBLE Image is not compatible
0x20002050 NT_ERROR_NO_SAFEMODE There is no safe mode support
0x20002051 NT_ERROR_IMAGE_VERIFY_FAILED Image verification failed
0x20002052 NT_ERROR_IMAGE_UPDATE_IN_PROGRESS Image update already in progress
0x20002053 NT_ERROR_PROCESS_DOES_NOT_EXIST Process does not exist
0x20002054 NT_ERROR_UNSUPPORTED_EXTENDED_DESCRIPTOR The extended descriptor is not supported
0x20002055 NT_ERROR_LIBRARY_NOT_COMPATIBLE The library is not compatible
0x20002056 NT_ERROR_INVALID_PARAMETER The parameter is not valid
0x20002057 NT_ERROR_SHARED_MEM_CORRUPTED Shared memory corrupted
0x20002058 NT_ERROR_SHARED_MEM_ILLEGAL_VERSION Illegal version of shared memory
0x20002059 NT_ERROR_SERVICE_ERROR Not able to start the service - see the log
0x2000205A NT_ERROR_SERVER_CANNOT_CONNECT Server cannot connect
0x2000205B NT_ERROR_NT_INIT_ALREADY_CALLED NT_Init has already been called
0x2000205C NT_ERROR_HOSTBUFFER_MIX host buffers from in-line and capture adapters cannot be merged in a streamid
0x2000205D NT_ERROR_FEATURE_NOT_SUPPORTED Feature not supported
0x2000205E NT_ERROR_HASHMASK_ALREADY_SET Hash mask already set for the specified hash mode
0x2000205F NT_ERROR_SEGMENT_MERGE_CONFLICT Segment interface cannot merge traffic
0x20002060 NT_ERROR_TXPORT_MISSING TxPort option required for in-line adapters
0x20002061 NT_ERROR_NO_AVAILABLE_HOSTBUFFER No available host buffer found matching the command
0x20002062 NT_ERROR_MERGE_NOT_POSSIBLE Merging is not possible
0x20002063 NT_ERROR_INLINE_SEGMENT_CONFLICT The segment interface cannot be used with in-line adapters
0x20002064 NT_ERROR_MISSING_SOURCEPORT Missing source port
0x20002065 NT_ERROR_MISSING_DESTINATIONPORT Missing destination port
0x20002066 NT_ERROR_MISSING_HASHMASKS Missing hash masks
0x20002067 NT_ERROR_HASHMODE_ALREADY_SET Hash mode is already set
0x20002068 NT_ERROR_MISSING_SETUP_OPTION Missing setup option
0x20002069 NT_ERROR_TIMESTAMPTYPE_MIX Time stamp types cannot be mixed in a stream ID
0x2000206A NT_ERROR_STREAM_LOCK_LIST Failed to acquire the stream list lock
0x2000206B NT_ERROR_INVALID_PACKET Invalid packet
0x2000206C NT_ERROR_INVALID_PACKET_SIZE Invalid packet size - length must be 8 bytes aligned
0x2000206D NT_ERROR_RESOURCE_UNAVAILABLE Resource unavailable
0x2000206E NT_ERROR_LOG_FILE_ERROR Unable to open log file
0x2000206F NT_ERROR_INI_FILE_ERROR Illegal value found in the ini-file
0x20002070 NT_ERROR_INI_FILE_INTERNAL Internal error reading the ini-file
0x20002071 NT_ERROR_NTAPI_VERSION_MISMATCH NT_Init called with version mismatch
0x20002072 NT_ERROR_NTAPI_INFO_CLIENT_NOT_INIT NT_InfoOpen client not initialized
0x20002074 NT_ERROR_NTAPI_INFO_INVALID_HANDLE NT_Info invalid handle used
0x20002075 NT_ERROR_NTAPI_INFO_INVALID_CMD NT_Info invalid command
0x20002076 NT_ERROR_NTAPI_NET_PORT_NO_TX_SUPPORT Port does not support TX
0x20002077 NT_ERROR_NTAPI_NET_NO_TX_BUFFERS No TX buffers allocated on adapter
0x20002078 NT_ERROR_NTAPI_NET_TX_PORTS_INVALID Some TX ports specified in TX mask are invalid
0x20002079 NT_ERROR_NTAPI_NET_TX_PORT_INVALID TX ports specified is not in TX mask
0x2000207A NT_ERROR_NTAPI_NET_TX_PKT_SIZE_INVALID TX packet size is not supported
0x2000207B NT_ERROR_NTAPI_NET_TX_GET_OPTION_INVALID TX get option invalid
0x2000207C NT_ERROR_NTAPI_NET_TX_TSI_NOT_SUPPORTED Timestamp inject configured but not supported
0x2000207D NT_ERROR_NTAPI_NET_TX_L3_L4_CS_NOT_SUPPORTED Calculation of L3 and L4 checksum configured but not supported
0x2000207E NT_ERROR_NTAPI_NET_FCS_NOT_SUPPORTED Calculation of FCS checksum configured but not supported
0x2000207F NT_ERROR_NTAPI_STAT_GET_FAILED Could not receive updated statistics in a reasonable time
0x20002080 NT_ERROR_NTAPI_STAT_GET_INVALID_CMD NT_StatRead called with unknown command
0x20002081 NT_ERROR_NTAPI_SYSTEM_NULL_STREAM NT_System stream is NULL - call NT_Open to create a stream
0x20002082 NT_ERROR_NTAPI_SYSTEM_INVALID_STREAM NT_System stream is invalid
0x20002083 NT_ERROR_NTAPI_SYSTEM_READ_INVALID_CMD NT_SystemRead called with unknown command
0x20002084 NT_ERROR_NTAPI_SYSTEM_READ_NO_VPD_SUPPORT NT_SystemRead VPD requested, but not supported
0x20002085 NT_ERROR_NTAPI_NET_RELEASE_INVALID_BUF Tried to release an invalid buffer - timed out NetxxGet call must not be released
0x20002086 NT_ERROR_NTAPI_CLOSE_WITH_INUSE_BUFFERS NT_NetRxClose called with pending in-use buffers
0x20002087 NT_ERROR_NT_NOT_INITIALIZED NT not initialized
0x20002088 NT_ERROR_NT_SERVICE_LIMITED_MODE NT service running in limited mode due to initialization errors - command not permitted
0x20002089 NT_ERROR_NT_SERVICE_STARTUP_FAILED_VPD NT service startup failed - VPD initialization failed
0x2000208A NT_ERROR_NT_SERVICE_INI_FILE_BUSID_CLASH The ini-file contains adapters with same bus ID
0x2000208B NT_ERROR_NT_SERVICE_INI_FILE_ADAPTER_MISSING The ini-file contains adapters not present
0x2000208C NT_ERROR_NT_SERVICE_INI_FILE_ADPTERX_MISSING The ini-file [Adapter(x)] not found
0x2000208D NT_ERROR_NT_SERVICE_HBH_TX_FAILED Transmit failed
0x20002090 NT_ERROR_NT_SERVICE_HBM_NO_EMPTY_SLOT HBM reports no empty slot found (internal error)
0x20002091 NT_ERROR_NT_SERVICE_HBM_NO_TX_HOSTBUFFER HBM reports no free TX host buffers found
0x20002092 NT_ERROR_NT_SERVICE_HBM_NO_TX_HOSTBUFFER_NUMA HBM reports no free TX host buffers found
0x20002093 NT_ERROR_NT_SERVICE_HBM_HOSTBUF_IDX_ERROR HBM failed to find host buffer index (internal error)
0x20002094 NT_ERROR_NT_SERVICE_HBM_STREAMMAP_ERROR HBM reports no free stream maps found (internal error)
0x20002095 NT_ERROR_NT_SERVICE_HBM_EGRESS_ERROR HBM host buffer already mapped to egress port
0x20002096 NT_ERROR_NT_SERVICE_HBM_EGRESS_MAP_ERROR HBM error - only RX host buffers may be mapped to an egress port
0x20002097 NT_ERROR_NT_SERVICE_HBM_INIT_TOO_MANY_HB HBMInit: too many host buffers specified
0x20002098 NT_ERROR_NT_SERVICE_HBM_INIT_NO_NUMA HBMInit: no NUMA nodes specified
0x20002099 NT_ERROR_CPLD_INVALID_REG Invalid CPLD register to read/write
0x2000209A NT_ERROR_ADAPTER_BONDING_READ_DAUGHTER_FAILED Adapter bonding: daughter board read failed
0x2000209B NT_ERROR_ADAPTER_BONDING_INLINE_ADAPTER Adapter bonding: In-line adapters cannot be bonded with expansion cards
0x2000209C NT_ERROR_ADAPTER_BONDING_TRAINING Adapter bonding: Expansion bus training failed
0x2000209D NT_ERROR_ADAPTER_BONDING_SLAVE_ALREADY_BONDED Adapter bonding: Slave already bonded
0x2000209E NT_ERROR_ADAPTER_BONDING_SLAVE_NOT_FOUND Adapter bonding: Failed to find bonded slave
0x2000209F NT_ERROR_ADAPTER_BONDING_TOO_MANY_BUFFERS Adapter bonding: Too many host buffers defined (Total max 32)..
0x200020A0 NT_ERROR_SDRAM_INIT_FAILED SDRAM DDR: Initialize controller failed (internal error)
0x200020A1 NT_ERROR_SDRAM_CALIB_FAILED SDRAM DDR: Calibration failed (internal error)
0x200020A2 NT_ERROR_SDRAM_SELFTEST_FAILED SDRAM DDR: Self test failed (internal error)
0x200020A3 NT_ERROR_SDRAM_START_FAILED SDRAM DDR: Start failed (internal error)
0x200020A4 NT_ERROR_SDRAM_CONFIGURE_FEEDS_FAILED SDRAM DDR: Configure feeds failed (internal error)
0x200020A5 NT_ERROR_SENSOR_ADD_FAILED Add sensor failed (internal error)
0x200020A6 NT_ERROR_VPD_FAILED No VPD info
0x200020A7 NT_ERROR_VPD_INIT_FLASH_READ_FAILED VPD init: Flash read failed
0x200020A8 NT_ERROR_VPD_INIT_DEFRAG_FAILED VPD init: Failed defragmenting sectors (internal error)
0x200020A9 NT_ERROR_VPD_SUPPLIED_MEM_TOO_SMALL Not enough memory in buffer for VPD info
0x200020AA NT_ERROR_RESERVED1 Reserved
0x200020AB NT_ERROR_RESERVED2 Reserved
0x200020AC NT_ERROR_RESERVED3 Reserved
0x200020AE NT_ERROR_NT_TERMINATING NT library is terminating
0x200020AF NT_ERROR_NT_READING_FLASH_FAILED Reading flash failed
0x200020B0 NT_ERROR_NT_WRITING_FLASH_FAILED Writing flash failed
0x200020B1 NT_ERROR_NT_INIT_SPI_FAILED Initialising SPI failed
0x200020B2 NT_ERROR_NT_INIT_I2C_FAILED Initialising I2C failed
0x200020B4 NT_ERROR_NIM_NOT_PRESENT NIM not present
0x200020B5 NT_ERROR_PROFILE_NOT_ALLOWED The adapter cannot use the requested profile
0x200020B6 NT_ERROR_LOG_NOT_READY The log is not ready
0x200020B7 NT_ERROR_MERGE_NOT_ALLOWED Merge between different adapter types is not allowed
0x200020B8 NT_ERROR_IPF_MERGE_NOT_ALLOWED IPF unmatched stream merge on in-line adapter not allowed
0x200020B9 NT_ERROR_TX_LASER_DISABLE_NOT_SUPPORTED TX laser software disable is not supported
0x200020BA NT_ERROR_TX_LASER_DISABLE_FAILED TX laser disable failed
0x200020BB NT_ERROR_ADAPTER_NOT_SUPPORTED Adapter is not supported
0x200020BC NT_ERROR_PACKET_IF_NOT_SUPP When running PCAP header, the packet interface is not supported
0x200020BD NT_ERROR_MULTI_DATA_MASK Only one data mask definition allowed
0x200020BE NT_ERROR_HOSTBUFFER_TOO_SMALL The host buffer is too small
0x200020BF NT_ERROR_TXPORT_SAME_ADAPTER_MISMATCH A TX port is specified, receiving data from a capture adapter. The TX port must be on the same adapter as the receiving port(s)
0x200020C0 NT_ERROR_TXPORT_INLINE_MISMATCH The TX port does not match an in-line adapter
0x200020C1 NT_ERROR_TXPORT_PRODUCTFAMILY_MISMATCH The TX port does not match an adapter of same product family
0x200020C2 NT_ERROR_STREAM_PROFILE_MISMATCH The stream cannot merge from adapters with different profiles
0x200020C3 NT_ERROR_STREAM_PRODUCTFAMILY_MISMATCH The stream cannot merge from adapters of different product families
0x200020C4 NT_ERROR_INVALID_NUMBER Syntax error - invalid number
0x200020C5 NT_ERROR_HOSTBUFFERSIZE_OUT_OF_RANGE Host buffer size out of range
0x200020C6 NT_ERROR_RETRANSMIT_PORT_FILTER_NOT_ALLOWED Port filter is not allowed in retransmit
0x200020C7 NT_ERROR_SLICE_RETX_WITHOUT_RETRANSMIT Cannot setup retransmit slicer without a retransmit destination port
0x200020C8 NT_ERROR_PCI_BANDWIDTH_MEASUREMENT_FAILED The measurement of PCI bandwidth failed - please check the log
0x200020C9 NT_ERROR_SENSOR_SOURCE_NOT_SUPPORTED Sensor source not supported
0x200020CA NT_ERROR_SENSOR_SOURCEINDEX_OUT_OF_RANGE Sensor source index out of range
0x200020CB NT_ERROR_SENSOR_INDEX_OUT_OF_RANGE Sensor index out of range
0x200020CC NT_ERROR_SENSOR_LIMITS_OUT_OF_RANGE Sensor limits out of range
0x200020CD NT_ERROR_FILEHEADER_ONLY_ON_SEGMENTS The file header can only be retrieved when using the segment interface
0x200020CE NT_ERROR_STREAMID_TXPORT_MISMATCH The number of stream IDs and TX ports do not match
0x200020CF NT_ERROR_INVALID_VALUE Invalid value used
0x200020D0 NT_ERROR_UNSUPPORTED_FPGA_MODULE The FPGA is not supported by the adapter
0x200020D1 NT_ERROR_GLOBALSYNC_MODE_NOT_SUPPORTED Global sync mode not supported by inline adapters
0x200020D2 NT_ERROR_I2C_OPERATION_FAILED I2C operation failed
0x200020D3 NT_ERROR_WATCHDOG_TIMEOUT_OUT_OF_RANGE Watchdog timeout out of range
0x200020D4 NT_ERROR_DELAY_OUT_OF_RANGE Delay out of range
0x200020D5 NT_ERROR_ABSOLUTE_TX_TIMING Adapter does not support absolute TX timing
0x200020D6 NT_ERROR_PORT_DISABLE Adapter does not support disabling of the ports
0x200020D7 NT_ERROR_TIMESTAMP_INJECT_OFFSET Adapter does not support timestamp injection offset other than start of frame
0x200020D8 NT_ERROR_GLOBAL_SYNC_INVALID IFG cannot be changed while in Global Sync mode
0x200020D9 NT_ERROR_NT_SPI_RX_BUFFER_TOO_SMALL SPI RX buffer too small
0x200020DA NT_ERROR_TX_TIMING_NOT_SUPPORTED TX timing cannot be changed for the adapter
0x200020DB NT_ERROR_TS_INJECT_OFF_MODE_NOT_SUPPORTED Timestamp injection offset mode cannt be changed for the adapter
0x200020DC NT_ERROR_PTP_CFG_INVALID_PARAM PTP parameter configuration error
0x200020DD NT_ERROR_DRIVER_VERSION_MISMATCH The kernel driver version does not match the the user mode driver
0x200020DE NT_ERROR_MASKNO_OUT_OF_RANGE Mask Number out of range
0x200020DF NT_ERROR_NTAPI_NT_INIT_NOT_CALLED NTAPI is not initialized - NT_Init() has not been called
0x200020E0 NT_ERROR_NTAPI_INITIALIZING NTAPI is initializing
0x200020E1 NT_ERROR_NTAPI_TERMINATING NTAPI is terminating
0x200020E2 NT_ERROR_OUT_OF_RESOURCES No more resources available
0x200020E3 NT_IPC_STATUS_CONNECTION_CLOSED IPC connection closed
0x200020E4 NT_ERROR_DMA_OUT_OF_RANGE DMA memory physical address out of range
0x200020E5 NT_ERROR_HOST_BUFFER_MEM_TOO_BIG Host buffer memory size exceeded
0x200020E6 NT_ERROR_PTP_NOT_ENABLED_OR_NOT_AVAIL PTP is not enabled or not available
0x200020E7 NT_ERROR_PTP_DEL_ASYM_OUT_OF_RANGE PTP delay asymmetry out of range
0x200020E8 NT_ERROR_KEYLENGTH_OUT_OF_RANGE Key length out of range
0x200020E9 NT_ERROR_LINK_ERROR Link error
0x200020EA NT_ERROR_TOO_MANY_DESTINATION_PORTS Too many destination ports
0x200020EB NT_ERROR_FILE_EMPTY Empty file
0x200020EC NT_ERROR_INVALID_IDENTIFIER Invalid identifier used
0x200020ED NT_ERROR_OPTIONS_MISSING At least one option must be specified
0x200020EE NT_ERROR_PCAP_NG_VERSION_NOT_SUPPORTED Supplied PCAP-NG file version is not supported
0x200020EF NT_ERROR_PCAP_NG_INVALID_RESOLUTION Invalid time stamp resolution found in PCAP-NG file
0x200020F0 NT_ERROR_PCAP_NG_INVALID_PACKET_SIZE Invalid packet size found in PCAP-NG file
0x200020F1 NT_ERROR_CAP_FILE_NOT_RECOGNIZED The supplied capture file format is not recognized
0x200020F2 NT_ERROR_CAP_FILE_PACKET_TOO_LARGE Too large packets found. Captured with LRO (Large Receive Offload) enabled?
0x200020F3 NT_ERROR_CAP_FILE_STORED_LENGTH_INVALID Packet with invalid stored length found
0x200020F4 NT_ERROR_CAP_FILE_CREATION_ERROR Could not open target file for file format conversion
0x200020F5 NT_ERROR_CAP_FILE_CORRUPTED_ERROR The capture file is corrupted
0x200020F6 NT_ERROR_NSEB_NOT_ACTIVE NSEB interface not active
0x200020F7 NT_ERROR_LENGTH_OUT_OF_RANGE Length out of range
0x200020F8 NT_ERROR_MISSING_KEY_ACCESS_PARTIAL_BANK Bank option required for PARTIAL key access
0x200020F9 NT_ERROR_MISSING_KEY_ACCESS_INVALID_BANK Bank option invalid for SINGLE and FULL key access
0x20003000 NT_ERROR_NIM_ERROR NIM error
0x20003001 NT_ERROR_NIM_ID_UNHANDLED NIM ID unhandled
0x20003002 NT_ERROR_NIM_FUNC_NOT_SUPP NIM function not supported
0x20003003 NT_ERROR_NIM_OPTION_NOT_SUPP NIM option not supported
0x20003004 NT_ERROR_NIM_NUMBER_OUT_OF_RANGE NIM number out of range
0x20003005 NT_ERROR_NIM_ADDRESS_OUT_OF_RANGE NIM address out of range
0x20003006 NT_ERROR_NIM_INTERNAL_ERROR NIM internal error
0x20003007 NT_ERROR_NIM_FUNC_FAILED NIM function failed
0x20003008 NT_ERROR_NIM_INSUFF_ARRAY_SIZE NIM insufficient array size
0x20003009 NT_ERROR_NIM_NOT_RECOGNISED NIM not recognised
0x2000300A NT_ERROR_NIM_PN_NOT_RECOGNISED NIM product number not recognised
0x2000300B NT_ERROR_NIM_PWR_CLASS_NOT_SUPPORTED NIM power class not supported
0x2000300C NT_ERROR_NIM_TYPE_NOT_SUPPORTED NIM type is not supported
0x2000300D NT_ERROR_NIM_NOT_ACCESSIBLE NIM not accessible
0x20004000 NT_ERROR_AVR_ERROR AVR error
0x20004001 NT_ERROR_AVR_RX_BUFFER_TOO_SMALL AVR RX buffer too small
0x20004002 NT_ERROR_AVR_OPCODE_RETURNED_ERROR AVR Opcode did not succeed and returned an error
0x20004003 NT_ERROR_AVR_UNKNOWN_OPCODE_RETURNED AVR did not know the opcode requested
0x20004004 NT_ERROR_AVR_RETURNED_DATA_COUNT_MISMATCH AVR returned an unexpected number of data bytes
0x20004005 NT_ERROR_AVR_LOG_VERSION_UNHANDLED AVR log version unhandled
0x20004006 NT_ERROR_AVR_LOG_INCONSISTENCY AVR log inconsistency
0x20004007 NT_ERROR_AVR_SENSOR_DATA_NOT_UPDATED AVR did not update sensor data
0x20005000 NT_ERROR_AFU_ERROR AFU error
0x20005001 NT_ERROR_AFU_FILE_HANDLING AFU File handling error
0x20005002 NT_ERROR_AFU_INVALID_PARAM AFU Invalid parameter supplied
0x20005003 NT_ERROR_AFU_BUSY AFU Resource is busy
0x20005004 NT_ERROR_AFU_EXCEPTION AFU An exception occurred
0x20005005 NT_ERROR_AFU_NOT_FOUND AFU A required resource was not found
0x20005006 NT_ERROR_AFU_NOT_SUPPORTED AFU Requested operation is not supported
0x20005007 NT_ERROR_AFU_NO_DRIVER AFU Driver is not loaded
0x20005008 NT_ERROR_AFU_NO_DAEMON AFU FPGA Daemon (fpgad) is not running
0x20005009 NT_ERROR_AFU_NO_ACCESS AFU Insufficient privileges or permissions
0x2000500A NT_ERROR_AFU_RECONF_ERROR AFU Error while reconfiguring FPGA
0x10020002 NTE_MODULE_NTIPC_CON(2) Unsupported IPC socket type
0x10020003 NTE_MODULE_NTIPC_CON(3) Unsupported IPC socket family
0x10020004 NTE_MODULE_NTIPC_CON(4) IPC connection dropped by remote end or invalid
0x10020005 NTE_MODULE_NTIPC_CON(5) IPC connection closed by remote
0x10020006 NTE_MODULE_NTIPC_CON(6) IPC setsockopt failed
0x10020007 NTE_MODULE_NTIPC_CON(7) IPC create listen socket failed
0x10020008 NTE_MODULE_NTIPC_CON(8) IPC invalid attribute type specified
0x10020009 NTE_MODULE_NTIPC_CON(9) IPC accept call failed
0x1002000A NTE_MODULE_NTIPC_CON(10) IPC create socket failed
0x1002000B NTE_MODULE_NTIPC_CON(11) IPC bind socket failed
0x1002000C NTE_MODULE_NTIPC_CON(12) IPC listen socket failed
0x1002000D NTE_MODULE_NTIPC_CON(13) IPC connect socket failed
0x1002000E NTE_MODULE_NTIPC_CON(14) IPC set access rights failed
0x10030001 NTE_MODULE_NTIPC_SCHED(1) Memory allocation failed
0x10030002 NTE_MODULE_NTIPC_SCHED(2) Call to socketpair failed
0x10030003 NTE_MODULE_NTIPC_SCHED(3) pthread_mutex call failed
0x10030004 NTE_MODULE_NTIPC_SCHED(4) NtIpc Scheduler not valid
0x10030005 NTE_MODULE_NTIPC_SCHED(5) poll failed
0x10030006 NTE_MODULE_NTIPC_SCHED(6) Wakeup recv failed
0x10030007 NTE_MODULE_NTIPC_SCHED(7) Out of connection resources - you need to free/close connections
0x10040001 NTE_MODULE_NTMSG_NTIPC(1) Connection invalid
0x10040002 NTE_MODULE_NTMSG_NTIPC(2) Invalid NtMsg connection type
0x10040003 NTE_MODULE_NTMSG_NTIPC(3) recv buffer too small
0x10040004 NTE_MODULE_NTMSG_NTIPC(4) Invalid NtMsg connection cookie received
0x10040005 NTE_MODULE_NTMSG_NTIPC(5) IPC connection error
0x10050001 NTE_MODULE_NTMSG_DISPATCHER(1) Mutex failed
0x10050002 NTE_MODULE_NTMSG_DISPATCHER(2) Memory allocation failed
0x10050003 NTE_MODULE_NTMSG_DISPATCHER(3) Dispatcher creation failed
0x10050004 NTE_MODULE_NTMSG_DISPATCHER(4) Dispatcher callback function already registered